2.0L and 2.6L flywheel interchange?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.0L and 2.6L flywheel interchange? [Re: NathanC] #374530 01/08/04 04:15 AM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

No. I think w.0 has assymetric bolt pattern on crankshaft flange like 2.0, and 2.6 is equal bolt pattern.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
2.0L and 2.6L flywheel interchange?	carnuck	01/06/04 02:05 AM
Re: 2.0L and 2.6L flywheel interchange?	NathanC	01/06/04 04:26 AM
Re: 2.0L and 2.6L flywheel interchange?	fasteddy	01/08/04 04:15 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.613s Queries: 16 (3.610s) Memory: 0.5968 MB (Peak: 0.6297 MB) Data Comp: Off Server Time: 2026-06-13 17:00:08 UTC
Valid HTML 5 and Valid CSS