Pulling apart TPS

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Pulling apart TPS [Re: Dok] #374906 01/06/04 05:46 PM

Joined: Mar 2000

Posts: 134

Morganton, NC USA

bud r

Wheeler

I pulled mine apart and it is thick film resistors on a ceramic base. Not much you can do to hurt ( or help) it so fixing the spring should be ok... I hope... Mine still works. I JB Welded it back together.

Bud R 828-572-1202
98-04 Tacoma, locked, dual cases, ready to go

http://www.budbuilt.com

Entire Thread
Subject	Posted By	Posted
Pulling apart TPS	Dok	01/06/04 03:13 PM
Re: Pulling apart TPS	dknight	01/06/04 05:44 PM
Re: Pulling apart TPS	bud r	01/06/04 05:46 PM
Re: Pulling apart TPS	bud r	01/06/04 05:48 PM
Re: Pulling apart TPS	dknight	01/06/04 06:12 PM
Re: Pulling apart TPS	Dok	01/06/04 06:21 PM
Re: Pulling apart TPS	Anonymous	01/06/04 08:00 PM
Re: Pulling apart TPS	toowacky	01/06/04 06:07 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.466s Queries: 16 (3.464s) Memory: 0.6073 MB (Peak: 0.6403 MB) Data Comp: Off Server Time: 2026-06-18 14:17:06 UTC
Valid HTML 5 and Valid CSS