'90 2.8 missing parts?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: '90 2.8 missing parts? #376278 01/09/04 12:54 AM

Joined: Oct 2002

Posts: 2,285

Boston (roslindale)

CPOM

Body Damage is Cool

You can buy generic stove pipe tube at any auto parts store. It looks like aluminum foil.

Before you hook that thing back up, make sure the flapper valve opens and closes and is somewhat air tight.

The flapper is vacuum actuated by the temp sensor behind the air filter.

You should have a vac line running from TB to temp sensor, then a vac line running from that to the flapper, for it to work.

CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender

Entire Thread
Subject	Posted By	Posted
'90 2.8 missing parts?	MeatWagon	01/08/04 04:23 PM
Re: '90 2.8 missing parts?	Anonymous	01/08/04 07:27 PM
Re: '90 2.8 missing parts?	CPOM	01/09/04 12:54 AM
Re: '90 2.8 missing parts?	rattler98	01/09/04 08:40 PM
Re: '90 2.8 missing parts?	Joelpat	01/09/04 11:04 PM
Re: '90 2.8 missing parts?	Ed Mc	01/09/04 01:58 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.685s Queries: 15 (3.682s) Memory: 0.6031 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-06-22 21:54:43 UTC
Valid HTML 5 and Valid CSS