Quote
I'm not sure I follow you- is it turning over slowly or not? If so, the you're NOT getting enough current to the starter. It's not enough to have 12 volts. The cable has to be in good enough shape to dump a couple of hundred amps into the motor, otherwise, no go. If it's *not* cranking over at all, then it may be in the primary circuit (starter contacts, ignition key switch, bad starter relay, etc.)

The noise was the solinoid plunger actuating. However it wasn't making contact to the main power lead so the starter motor wasn't turning over.
Replacing the contacts did fix the starter.


86 Toyota 4 runner
35x12.5 BFG MT's, 4.56's XRC8 winch
My cardomain page