|
|
|
|
 Re: Warn Winch M8000 mounting instructions
#37975
07/20/02 07:31 AM
|
Joined: May 2002
Posts: 239
Wheeler
|
Corey,
I've heard of Reiter, I think it's past Gold Bar. It would be fun to get together again, I'll check the thread. Mark
'87 4Runner with factory alloy wheels, 225X15 tires, 4banger and 5spd, 26 mpg @60-62 mph, 225k
|
|
 Re: Warn Winch M8000 mounting instructions
#37976
07/29/02 06:52 PM
|
Joined: Dec 1999
Posts: 915
OP
Rock Warrior
|
Installed the winch over the weekend with Jim Brink and Tim Coffey's help (thanks again). I decided to mount the solenoid box under the hood and changed to longer battery cables so that it will reach the winch and battery. I had to re-drill holes on the roller fairlead itself and I had to grind some metal off on the fairlead going into the bumper. But otherwise install went smoothly.
2000 - Tundra, V8 2WD Access Cab
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.014s Queries: 15 (0.011s) Memory: 0.5915 MB (Peak: 0.6556 MB) Data Comp: Off Server Time: 2026-11-07 00:45:41 UTCValid HTML 5 and Valid CSS 
