I just finished replacing the brushes on my alternator since I was having troubles with my truck not starting. I even followed the write up on the maitenance section of this site to replace them. I got everything put back together, put in a new battery (just to rule it out as the problem) and it still wont start. I jumped it w/my other truck and it started fine but once I remove the jumper cables the truck runs for a few seconds and then dies. The battery and e-brake lights still come on. I'm thinkin the alternator is just blown but I'm not sure. Any help would be appreciated as I am a little frustrated. <img src="/forums/images/graemlins/angry.gif" alt="" />