@#$#@ 2.6L Crank Pulley bolt!!

Print Thread

Rate Thread

Re: @#$#@ 2.6L Crank Pulley bolt!! [Re: jeepfiend] #384433 01/21/04 04:02 PM

Joined: Jan 2004

Posts: 40

MeatWagon

Getting the Wheeling Fever

Don't know what the torque spec is - but I had to finally bring mine to a shop, where they broke 2 HD sockets on the thing. They finally used some fancy gear on it- which told them it was over 200 before it finally came loose.

...............................................
'90 Trooper LS 2.8, 5spd, 3" body lift, 33x12.5, dent

Entire Thread
Subject	Posted By	Posted
@#$#@ 2.6L Crank Pulley bolt!!	dcg9381	01/21/04 05:36 AM
Re: @#$#@ 2.6L Crank Pulley bolt!!	Ed Mc	01/21/04 05:51 AM
Re: @#$#@ 2.6L Crank Pulley bolt!!	Anonymous	01/21/04 06:14 AM
Re: @#$#@ 2.6L Crank Pulley bolt!!	jeepfiend	01/21/04 07:02 AM
Re: @#$#@ 2.6L Crank Pulley bolt!!	Anonymous	01/21/04 07:49 AM
Re: @#$#@ 2.6L Crank Pulley bolt!!	jeepfiend	01/21/04 03:51 PM
Re: @#$#@ 2.6L Crank Pulley bolt!!	MeatWagon	01/21/04 04:02 PM
Re: @#$#@ 2.6L Crank Pulley bolt!!	pucci	01/21/04 05:40 PM
Re: @#$#@ 2.6L Crank Pulley bolt!!	jeepfiend	01/21/04 08:12 PM
Re: @#$#@ 2.6L Crank Pulley bolt!!	Anonymous	01/22/04 12:02 AM
Re: @#$#@ 2.6L Crank Pulley bolt!!	Anonymous	01/22/04 12:18 AM
Re: @#$#@ 2.6L Crank Pulley bolt!!	Anonymous	01/21/04 07:55 AM
Re: @#$#@ 2.6L Crank Pulley bolt!!	Richard Saylor	01/21/04 02:06 PM
Re: @#$#@ 2.6L Crank Pulley bolt!!	Anonymous	01/21/04 05:47 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: