Distributor on 3.0

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Distributor on 3.0 #384914 01/22/04 02:22 AM

Joined: Oct 2001

Posts: 926

Baltimore, MD

fpkelly

Rock Warrior

Someone suggested that maybe the rotor inside the distributor was bad on my truck, causing it to stumble. Anyone who knows, does it look fine? There are grooves on those little white things at the top of the cap and the metal end of the rotor does look a little rough.
[Linked Image]

Last edited by fpkelly; 01/22/04 02:38 AM.

Entire Thread
Subject	Posted By	Posted
Distributor on 3.0	fpkelly	01/22/04 02:22 AM
Re: Distributor on 3.0	fpkelly	01/22/04 02:39 AM
Re: Distributor on 3.0	J94_4runner	01/22/04 02:48 AM
Re: Distributor on 3.0	fpkelly	01/22/04 02:57 AM
Re: Distributor on 3.0	J94_4runner	01/22/04 03:01 AM
Re: Distributor on 3.0	Anonymous	01/22/04 03:01 AM
Re: Distributor on 3.0	fpkelly	01/22/04 03:08 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.793s Queries: 15 (3.791s) Memory: 0.6057 MB (Peak: 0.6387 MB) Data Comp: Off Server Time: 2026-06-22 18:35:20 UTC
Valid HTML 5 and Valid CSS