So you remove all the 4 long bolts holding the top part, now there are 4 more (two nuts and two small bolts) holding the other side down. You can see it, its located under the bracket that holds the throtle cable, remove that and you'll get to the bolt. then theres another on the same side, you'll see them. Once you do that, or even before, remove all the vaccum hoses and fuel injector fuel hose among other various things there. Then remove the EGR vavle, and the ones that hold down the other little vavles, this way you wont break them. Once its all loose, lift the intake straight up, but the front metal pipes are going to hit, so at the same time lift them up too and slowly pull them out of the way, usually towards the front of the truck, and the intake should barely squeeze right out. if any more help let me know. <img src="/forums/images/graemlins/cheers.gif" alt="" />