3.4L finally in and running

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.4L finally in and running #387862 01/31/04 12:24 AM

Joined: Apr 2001

Posts: 185

Springfield, OH

Ed C

Wheeler

Jim,

When you set the timing did you disconnect the electronic spark control first, and then reconnect it after you were done?

I remember doing that; I just don't remember the location of the connector - maybe the console where the ODB code jumper is.

How did you remove/install the balancer? Could the timing marks have shifted?

Ed

Entire Thread
Subject	Posted By	Posted
3.4L finally in and running	Anonymous	01/27/04 02:11 AM
Re: 3.4L finally in and running	CPOM	01/27/04 03:35 AM
Re: 3.4L finally in and running	Anonymous	01/27/04 03:43 AM
Re: 3.4L finally in and running	Anonymous	01/30/04 07:13 PM
Re: 3.4L finally in and running	Ed C	01/31/04 12:24 AM
Re: 3.4L finally in and running	Anonymous	01/31/04 02:12 AM
Re: 3.4L finally in and running	CPOM	01/31/04 04:14 AM
Re: 3.4L finally in and running	Anonymous	01/31/04 07:30 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.538s Queries: 15 (3.535s) Memory: 0.6072 MB (Peak: 0.6402 MB) Data Comp: Off Server Time: 2026-06-21 19:42:00 UTC
Valid HTML 5 and Valid CSS