2.6 Silent Shaft and chain elimination

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.6 Silent Shaft and chain elimination [Re: 1987Raider] #389189 01/28/04 05:12 PM

Joined: Jan 2004

Posts: 72

Kingfisher OK USA

kmac

Getting the Wheeling Fever

Thanks I will check into it. On a scale of 1-10 what would you number the vibration without the balance shafts. I know it can't be as bad as having just one behind the oil pump.

MOBIL STAND MAN with 1989 Dodge D-50 2.6 5spd 4WD sport cab factory original (not for long) 2.6 on the engine stand being built to RUN. www.mobilstands.com

Entire Thread
Subject	Posted By	Posted
2.6 Silent Shaft and chain elimination	kmac	01/28/04 03:10 PM
Re: 2.6 Silent Shaft and chain elimination	1987Raider	01/28/04 04:57 PM
Re: 2.6 Silent Shaft and chain elimination	kmac	01/28/04 05:12 PM
Re: 2.6 Silent Shaft and chain elimination	1987Raider	01/28/04 07:01 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.805s Queries: 16 (3.802s) Memory: 0.5978 MB (Peak: 0.6308 MB) Data Comp: Off Server Time: 2026-06-10 04:53:21 UTC
Valid HTML 5 and Valid CSS