IFS 10 bolt

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

IFS 10 bolt #395427 02/08/04 03:01 AM

Joined: Jan 2001

Posts: 165

Mt. Laurel, NJ

Ryan12980

Wheeler

is the front housing the same between a second gen amigo and any other isuzu besides the second gen rodeo's and amigo's? Kinda wondering if its the same width as the first gen's or troopers or such not. I know cv's are different, but are the housings?

Ryan Christiansen

99 Amigo, 2wd V-6 Auto. 3 torsion lift, ES9000's, Yoko's AT+II 31x10.5R15, Indy 4x steel rear bumper, radio shack cb, diesel antenna.

Entire Thread
Subject	Posted By	Posted
IFS 10 bolt	Ryan12980	02/08/04 03:01 AM
Re: IFS 10 bolt	Anonymous	02/08/04 08:02 AM
Re: IFS 10 bolt	Ryan12980	02/09/04 04:22 PM
Re: IFS 10 bolt	HCMP	02/09/04 05:08 PM
Re: IFS 10 bolt	Anonymous	02/10/04 03:29 AM
Re: IFS 10 bolt	Ryan12980	02/10/04 03:35 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.590s Queries: 15 (3.588s) Memory: 0.6027 MB (Peak: 0.6357 MB) Data Comp: Off Server Time: 2026-06-17 12:09:08 UTC
Valid HTML 5 and Valid CSS