Hi-Lift question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Hi-Lift question #399161 02/13/04 03:28 PM

Joined: Mar 2003

Posts: 54

Rockwall, Texas

montyjo

Getting the Wheeling Fever

I resently bought a 48" farm jack (hi-lift clone). The base plate isn't ridgid to the jacks main rail, it woobles around , is this normal? How do you position the jack when lifting the car?

1995 Montero SR
SuperWinch Hubs, 31x10.5 BFG A/T'S

Entire Thread
Subject	Posted By	Posted
Hi-Lift question	montyjo	02/13/04 03:28 PM
Re: Hi-Lift question	Lloyd Swartz	02/13/04 03:48 PM
Re: Hi-Lift question	lee_raider	02/13/04 05:36 PM
Re: Hi-Lift question	sparkem	02/13/04 06:38 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.470s Queries: 15 (3.468s) Memory: 0.5986 MB (Peak: 0.6316 MB) Data Comp: Off Server Time: 2026-06-18 23:43:57 UTC
Valid HTML 5 and Valid CSS