Daystar or Revtec?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Daystar or Revtec? [Re: Josh] #400445 02/18/04 05:47 PM

Anonymous

Unregistered

Yea thats why I say Revtec over Daystar, plus Revtek has two spacers for each side of the front end. This is supposed to help with geometry etc. Daystar is just a single poly spacer. anyhow goodluck --bill

Entire Thread
Subject	Posted By	Posted
Daystar or Revtec?	Anonymous	02/16/04 05:35 AM
Re: Daystar or Revtec?	Anonymous	02/17/04 05:20 AM
Re: Daystar or Revtec?	Ricochet	02/18/04 02:17 AM
Re: Daystar or Revtec?	Josh	02/18/04 01:14 PM
Re: Daystar or Revtec?	Anonymous	02/18/04 05:47 PM
Re: Daystar or Revtec?	spannky	02/19/04 06:43 AM
Re: Daystar or Revtec?	Anonymous	02/19/04 04:30 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.437s Queries: 16 (3.435s) Memory: 0.6018 MB (Peak: 0.6348 MB) Data Comp: Off Server Time: 2026-05-31 09:03:10 UTC
Valid HTML 5 and Valid CSS