Ok, well the weather was nice enough this weekend to go out and get to know my tacoma rear brakes a little better. I got as far as getting the tire off, and ran into some problems. I couldn't get the drum off. I didn't have a rubber mallet handy, and didn't feel like banging it with a metal hammer. Also, it felt like the drum was on there pretty tight, so i thought maybe the brakes were holding the drum on there. I went to look for the access hole in the backing plate so i could get to the adjusting screw to back off the brakes, but I couldn't find it. I've got some pictures are the link below. Maybe you guys can give me some insight and more advise. Thanks for all the help so far!!

http://www.geocities.com/mattletts/mypage.html