99 Rodeo all fixed again-misfire codes

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

99 Rodeo all fixed again-misfire codes #401382 02/17/04 07:04 PM

Joined: Feb 2004

Posts: 28

Alberta Canada

Michelle

Getting the Wheeling Fever

Thanks to everyone for there input and help. I had a previous post on here about misfire codes for # 3 cylinder and mass airflow sensor etc. Problem is all fixed. Turns out it was the intake gasket at the #3 cylinder. Im curious though as to why Isuzu uses ceramic gaskets? <img src="/forums/images/graemlins/cheers.gif" alt="" />

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.005s Queries: 14 (0.003s) Memory: 0.5788 MB (Peak: 0.6189 MB) Data Comp: Off Server Time: 2026-06-17 15:27:50 UTC
Valid HTML 5 and Valid CSS