Simple. If you have the 1/2" head bolts a 5/8" socket should be able to fit over the nut of the bolt.

I did the swap about a year ago on my CJ but it has a 1989 Wrangler engine in it with the 1/2" head bolts on it so there was no modification needed. 1987-1990 & (I think) 1979-1981 258's have the 1/2" head bolts. You'll like the added horses after the swap. Good luck!!

Chris


1983 CJ7 with 1.21 giga-watts and a supercharged flux-capacitor