How to determine Head Bolt sizes

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How to determine Head Bolt sizes [Re: BoggerCJ7] #403532 02/20/04 08:16 AM

Joined: Nov 2002

Posts: 185

Sebring, Fl

DaJeeper

Wheeler

I have two types of bolts on the head that I can see. The bolts with studs are 5/8" nuts like you said. There are other bolts which do not have studs and these heads are smaller than 5/8". However, if more than one is 1/2" then they all must be 1/2". This is good news for me.

Thanks,

83 CJ Scrambler I6 4 Speed Manual.
Jeep: An expression of freedom!

Entire Thread
Subject	Posted By	Posted
How to determine Head Bolt sizes	DaJeeper	02/20/04 06:33 AM
Re: How to determine Head Bolt sizes	BoggerCJ7	02/20/04 07:28 AM
Re: How to determine Head Bolt sizes	DaJeeper	02/20/04 08:16 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.545s Queries: 16 (3.542s) Memory: 0.5959 MB (Peak: 0.6289 MB) Data Comp: Off Server Time: 2026-06-20 09:37:58 UTC
Valid HTML 5 and Valid CSS