|
|
Re: Largest tire on IFS Isuzu
#405274
02/24/04 03:37 PM
|
Joined: Sep 2000
Posts: 4,277
Roll Me Over
|
Chris, if you could find a cheap set of hummer rims, you could always get new centers for them. you might want to talk to JOHNS351C over on PBB, he can easily set you up with a hummer centers thats 6 on 5.5. Changing out wheel centers might be your cheapest option for this.
-Rob
|
|
Re: Largest tire on IFS Isuzu
[Re: RobG]
#405275
02/24/04 08:20 PM
|
Joined: Jan 2000
Posts: 1,656
Body Damage is Cool
|
yeah i was going to suggest that..................my only issue w/ re-centering wheels is that i wonder really how "round" you can get them......especially if you are talking about running them on a daily driver type rig.
i know trail use is a whole different story and a different level of "exactness"
interesting on the 16.5/ 6 lug chevy wheel.......never heard of that........i've done my fair share of junkyard browsing and can say i have yet to see that wheel.
'93 RS 3.2L - DD/trail build '97 7.3L Powerstroke - tow rig '71 FJ40 - V-8, nv4500, atlas, D60, 14B - current build Owner: http://www.INDEPENDENT4x.comm-f 9am-6pm EST. 804-550-0480
|
|
Re: Largest tire on IFS Isuzu
[Re: matthew]
#405276
02/24/04 08:29 PM
|
Joined: Sep 2000
Posts: 4,277
Roll Me Over
|
Yea Matt, i thought about that too, since i'm sure chris still wants to keep this setup very streetable. I think you would have to have someone able to spin the wheels on a lathe for you to ensure balance and good road qualities. If you have the right access to the machinery and/or friends, this option could turn out to be the cheapest way to go though.
-Rob
|
|
Re: Largest tire on IFS Isuzu
[Re: rodeo_chris]
#405277
02/25/04 03:24 AM
|
Joined: Aug 2000
Posts: 2,074
Body Damage is Cool
|
Chris: I believe there is a "work truck" spec wheel that is drilled for multiple bolt patterns. IIRC, they were 16.5 rims. We had a few in our building that we used for fleet spares.
Mark-95Trooper,fr LockRight,rr LSD,5spd,TeraLow,Indy tierods&QD sways,CO2, RS9000Xs,OME912&2.5"spacers,1"BL,ARB w/Warn M8000,OBT rear bumper&sliders. Pics indy4x
|
|
Re: Largest tire on IFS Isuzu
[Re: RobG]
#405278
02/25/04 06:57 AM
|
Joined: Apr 2001
Posts: 1,103
OP
Body Damage is Cool
|
If you have the right access to the machinery and/or friends, this option could turn out to be the cheapest way to go though. Option #2 is to use the milling machine and lathe that my engineering department owns to make some 6 to 8 lug wheel adapters. I found them online from a link on Pirate, but they were over $100 each. I could probably locate some 8 lug steel wheels for cheap/free. I'll figure something out. Rob - I picked up my new master cylinder today. Tried to use the part number in that picture on your website, but was told it is an obsolete number. The one I got isn't the plastic reservoir like yours, but the cast iron one. I'm trying to get the fittings worked out, but hit a dead end at the local Napa store today. Still doing my homework, so lots of searching left for me. -chris
94 Rodeo, 35's, 5.38's, locked F&R, Rocker bar on one side, other side in garage
96 Tacoma, DD, pre-dented
|
|
|
|