CV Axle Removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: CV Axle Removal [Re: oldsub86] #406149 02/25/04 12:13 AM

Joined: Feb 2004

Posts: 290

Duncannon, Pa

Kaptain

Mudrunner

Thanks.. I ended up taking off the upper balljoint nut, and the nut that holds the sway bar.. It dropped down far enough to slide it out..ahh what a pain in the ass, atleast the other side will be easier now that i know exactly what to do.

93' Toy xCab
bobbed > 22rEB > w56 > stock duals > SAS > 4.88's > 37's

Entire Thread
Subject	Posted By	Posted
CV Axle Removal	Kaptain	02/24/04 03:07 PM
Re: CV Axle Removal	Kendall	02/24/04 04:03 PM
Re: CV Axle Removal	oldsub86	02/24/04 11:11 PM
Re: CV Axle Removal	Kaptain	02/25/04 12:13 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.519s Queries: 16 (3.499s) Memory: 0.5985 MB (Peak: 0.6315 MB) Data Comp: Off Server Time: 2026-06-25 04:05:57 UTC
Valid HTML 5 and Valid CSS