Rear Transfer Case Output Bearing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear Transfer Case Output Bearing #407191 02/26/04 02:54 PM

Anonymous

Unregistered

Yes it can be done in the truck. You only have to remove the extension housing. Hardest part is getting the flange off. Make sure you get a new flange nut.

MAX- Technically he means 2-piece as opposed to the 3-piece one he has now. We say 1-piece to mean without a carrier bearing.

Entire Thread
Subject	Posted By	Posted
Rear Transfer Case Output Bearing	Anonymous	02/26/04 05:03 AM
Re: Rear Transfer Case Output Bearing	Ishikawa	02/26/04 06:29 AM
Re: Rear Transfer Case Output Bearing	Anonymous	02/26/04 06:43 PM
Re: Rear Transfer Case Output Bearing	Red_Chili	02/26/04 08:13 PM
Re: Rear Transfer Case Output Bearing	Anonymous	02/28/04 07:07 AM
Re: Rear Transfer Case Output Bearing	ZUK	02/28/04 02:34 PM
Re: Rear Transfer Case Output Bearing	Anonymous	03/01/04 05:48 AM
Re: Rear Transfer Case Output Bearing	Anonymous	03/01/04 03:12 PM
Re: Rear Transfer Case Output Bearing	Anonymous	02/26/04 02:54 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.540s Queries: 15 (3.537s) Memory: 0.6051 MB (Peak: 0.6381 MB) Data Comp: Off Server Time: 2026-06-22 16:40:09 UTC
Valid HTML 5 and Valid CSS