Rear Transfer Case Output Bearing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear Transfer Case Output Bearing #407197 03/01/04 03:12 PM

Anonymous

Unregistered

I thought you had a 4cyl. Does the output flange have up and down slop? If not I wouldn't worry about replacing the bearing.

Entire Thread
Subject	Posted By	Posted
Rear Transfer Case Output Bearing	Anonymous	02/26/04 05:03 AM
Re: Rear Transfer Case Output Bearing	Ishikawa	02/26/04 06:29 AM
Re: Rear Transfer Case Output Bearing	Anonymous	02/26/04 06:43 PM
Re: Rear Transfer Case Output Bearing	Red_Chili	02/26/04 08:13 PM
Re: Rear Transfer Case Output Bearing	Anonymous	02/28/04 07:07 AM
Re: Rear Transfer Case Output Bearing	ZUK	02/28/04 02:34 PM
Re: Rear Transfer Case Output Bearing	Anonymous	03/01/04 05:48 AM
Re: Rear Transfer Case Output Bearing	Anonymous	03/01/04 03:12 PM
Re: Rear Transfer Case Output Bearing	Anonymous	02/26/04 02:54 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.491s Queries: 15 (3.488s) Memory: 0.6046 MB (Peak: 0.6375 MB) Data Comp: Off Server Time: 2026-06-19 00:03:43 UTC
Valid HTML 5 and Valid CSS