Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
winch installation #407703 02/27/04 12:57 AM
Joined: Jun 2003
Posts: 152
Gellekanao Offline OP
Wheeler
Hope you guys can help.

How would you install a winch on a 96' Montero without a bull bar??
<img src="/forums/images/graemlins/confused.gif" alt="" />


thanks,
Stephen


Exploring the outback is my game!

2005 Mitsu Gen3 Limited
OME Custom Suspension
Custom made safari roof rack
Garmin GPS
32X12.50X16 BFG Mud Terrain

1997 Mitsu Gen2 LS
Safari Roof rack
Garmin GPS
33x11.50x15 BFG MUds
Re: winch installation [Re: Gellekanao] #407704 02/27/04 04:06 PM
Joined: Feb 2001
Posts: 913
L
Lee N Offline
Rock Warrior
Don't have any direct answers other than you'll have to design it yourself. There's someone here from Norway with the username of Jeepir who has a winch installed below the bumper. Looks like a clean install. PM him and see if you can find out any details. Here's a pic I found -

[Linked Image]


Lee
'94 LS, 3.0 V6, Auto, completely stock
Re: winch installation [Re: Gellekanao] #407705 02/27/04 07:10 PM
Joined: Oct 2003
Posts: 1,258
DavidG Offline
Body Damage is Cool
Gellekanao,

If you hear back from Jeepir could you post the information, I would also be interested in what options exist. I would like to change bumpers and potentially have the option of installing a winch (when the $ is available smile
It looks like TJM Australia may have a solution for a winch mount, but I didn't see a Airbag-compatible, winch-ready listing. I just got off the phone with TJM Products in Tennesse to check on it. He said they do not have any bumpers available for pre-2000 Monteros.

Let us know what you find out,

David


1997 Montero SR

<a href="www.georgiaoverland.com" target="_blank">www.georgiaoverland.com</a>
Re: winch installation [Re: DavidG] #407706 02/27/04 09:19 PM
Joined: Oct 2003
Posts: 1,258
DavidG Offline
Body Damage is Cool
G, I also checked with the ARB folks in Washington. They don't have a listing either. Any of you guys out there running winch bumpers/mounts on a GenII please post...


1997 Montero SR

<a href="www.georgiaoverland.com" target="_blank">www.georgiaoverland.com</a>
Re: winch installation [Re: Gellekanao] #407707 02/27/04 09:27 PM
Joined: Jan 2000
Posts: 16,227
off-roader Offline
Web Wheeler
*****
On a gen I there's enough room between the frame rails for a Mile Marker mounted to a plate. They you can simply cut a slot/hole in the middle of the bumper for the cable to feed through and attach a fairlead.

Regarding bumpers, I know Don on this forum makes some sweet aftermarket low profile bumpers for Gen I's. I'm not sure what's exactly involved w/ the airbag mods required but maybe he can do something.


Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page
Re: winch installation [Re: off-roader] #407708 02/27/04 10:01 PM
Joined: Oct 2003
Posts: 1,258
DavidG Offline
Body Damage is Cool
Called Warn, nothing there either. Thanks for the info Offroader.

DavidG


1997 Montero SR

<a href="www.georgiaoverland.com" target="_blank">www.georgiaoverland.com</a>
Re: winch installation [Re: DavidG] #407709 02/27/04 10:26 PM
Joined: Jan 2000
Posts: 16,227
off-roader Offline
Web Wheeler
*****
David,

Feel free to make those calls but from my experience, unless your talking to an overseas company, you won't find too many companies with anything for a Mitsu.

That being said, there are a few bull bar manufacturers but Mitsu's done some wierd things with their frames in the US versus overseas (where all mitsu bull bars come from unless custom fab'd in N. America).

Thus far I know ECB (east coast bullbar), ARB, & TJM make bull bars in Australia.

Ray

Re: winch installation [Re: off-roader] #407710 02/27/04 11:35 PM
Joined: Oct 2003
Posts: 1,258
DavidG Offline
Body Damage is Cool
The guy I spoke to at the TJM importer mentioned the difference in frame widths. But I believe the brackets can be modified to work (right Angelo?). Looks like I'll have to send some emails out, don't think I'll be calling Australia too many times.


1997 Montero SR

<a href="www.georgiaoverland.com" target="_blank">www.georgiaoverland.com</a>
Re: winch installation [Re: off-roader] #407711 02/27/04 11:40 PM
Anonymous
Unregistered
If you do decide to fabricate your own mount, be absolutely certain that it does not protrude forward of the frame mounts...this includes the bracket supporting the bumper.

Problem is, a winch mount placed anywhere near the impact absorbing section of your bumper mounts will (not "can", WILL) affect the deployment threshold of your airbags...if you mount it forward of the "crush cans", they will not absorb collision energy if you hit something...the shock will be stronger to your frame, and your airbags will deploy sooner (at a slower vehicle speed) than designed...the airbags could also deploy in an off-road obstacle impact (that could really ruin your day)!

Winches are for vehicles without airbags...and I DEFINITELY wouldn't waste my time and money to install one just 'cause it "looks cool"...install one ONLY if you have determined you really, really need it...they require yearly maintenance, cleaning, re-torquing of fasteners, cleaning of electrical terminals, proper spooling of cable/rope, PLUS proper training in use. A winch is like a 'loaded gun'...absolutely deadly in the wrong hands.

Alternatively, Warn sells a "pull pack"...basically, a winch mounted to a trailer drawbar...plug it in your receiver, hook cables up to your battery, and away you go!

Rob in Hell

Re: winch installation #407712 02/28/04 01:14 AM
Joined: Jan 2000
Posts: 8,160
Lloyd Swartz Offline
Web Wheeler
I dont believe any aftermarket bumper is available anymore. As far as stock, youll need some amount of hardware. Heck, even on a gen I you need a mount plate. The only option I found, and it worked well, involved taking a Ramsey winch mount for a Ford, slicing the stock bumper into 3 sections, welding the winch mount in place,(after some modification) the patching the stock bumper back together around the mount/ bull bar. Looks clean, and you only loose the roller fairleads distance of approach angle, no more. Sounds like alot of work, and it is, but it works better then you might think. If you want more details I can try and help you.


1996 SR From the Area 51 Skunk Works. 37"BFG Tires, 5" lift, Rock Track 4:1 Case, Tom Woods Drive Shafts, Oasis Air, Front ARB, lifted gas tank, T-max winch and lots of stuff that cost too much.
Page 1 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.013s Queries: 16 (0.009s) Memory: 0.6389 MB (Peak: 0.7652 MB) Data Comp: Off Server Time: 2026-11-17 12:42:20 UTC
Valid HTML 5 and Valid CSS