54MM Socket

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 54MM Socket [Re: mt_goat] #409928 03/02/04 06:34 PM

Anonymous

Unregistered

if it is ADD, you dont need to remove the spindle nuts, it already has the proper ones since you are just replacing a drive flange with the lockout. on vehicles with auto hubs, you need to buy the nuts and the lock ring.

Entire Thread
Subject	Posted By	Posted
54MM Socket	fpkelly	03/01/04 10:39 PM
Re: 54MM Socket	Anonymous	03/01/04 10:51 PM
Re: 54MM Socket	kyle-22r	03/02/04 12:48 AM
Re: 54MM Socket	J94_4runner	03/02/04 12:58 AM
Re: 54MM Socket	abnormaltoy	03/02/04 01:20 AM
Re: 54MM Socket	Kaptain	03/02/04 01:45 AM
Re: 54MM Socket	OOP'S	03/02/04 02:59 AM
Re: 54MM Socket	jasonmt	03/02/04 03:18 AM
Re: 54MM Socket	fpkelly	03/02/04 03:30 AM
Re: 54MM Socket	Anonymous	03/02/04 03:50 AM
Re: 54MM Socket	fpkelly	03/02/04 08:09 AM
Re: 54MM Socket	Kaptain	03/02/04 03:51 PM
Re: 54MM Socket	mt_goat	03/02/04 04:47 PM
Re: 54MM Socket	Anonymous	03/02/04 06:34 PM
Re: 54MM Socket	fpkelly	03/02/04 07:48 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.479s Queries: 16 (3.477s) Memory: 0.6198 MB (Peak: 0.6528 MB) Data Comp: Off Server Time: 2026-06-20 06:46:45 UTC
Valid HTML 5 and Valid CSS