|
|
|
|
Are these bolts supposed to be welded?
#413318
03/07/04 04:32 PM
|
Joined: Dec 2003
Posts: 103
OP
Wheeler
|
The bolts on my shackles are welded on the side that the bolt is supposed to slide out of. <img src="/forums/images/graemlins/angry.gif" alt="" /> Is this normal?
|
|
Re: Are these bolts supposed to be welded?
[Re: justtin00j]
#413319
03/07/04 04:40 PM
|
Joined: Apr 2000
Posts: 7,268
Isuzu Moderator
|
Yup. The other side is just a plate held onto the studs by two nuts. The plate comes off and the rest of the shackle slides out as a u-shaped piece.
Good Luck, Michael
|
|
Re: Are these bolts supposed to be welded?
[Re: mlclark]
#413320
03/07/04 04:42 PM
|
Joined: Dec 2003
Posts: 103
OP
Wheeler
|
ok i thought somebody welded them.
|
|
Re: Are these bolts supposed to be welded?
[Re: justtin00j]
#413321
03/07/04 05:33 PM
|
Joined: Apr 2000
Posts: 7,268
Isuzu Moderator
|
ok i thought somebody welded them. Somebody did. At the factory. <img src="/forums/images/graemlins/smile.gif" alt="" /> Michael
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.003s) Memory: 0.5993 MB (Peak: 0.6545 MB) Data Comp: Off Server Time: 2026-06-07 06:46:58 UTCValid HTML 5 and Valid CSS