I thought I had this fixed on Friday...

To recap - last week the idle on my 98 XJ got really rough and the check engine light came on. I plugged in my trusty OBD-II scanner and it tells me that cylider 3 is misfiring (I have the I6 engine, 93k miles).

I replaced the distributor rotor & cap, wires, and spark plugs. After I got the wires connected right (on the 2nd try) the engine started up and seemed ok (no more check engine light, smooth idle).

However, when I showed a friend of mine my nifty OBD-II scanner this week, I realized the engine computer is still reporting Cyl 3 misfires (code P0303). When I listend to the idle this morning on the way to work I could hear what sounded like an occasional cylinder miss, but there isn't a jaring vibration like last week. I can't tell for sure if the cylinder is missing at driving speeds, but I'm trying to pay attention to that now...

I exhausted the "simple" things I could think of doing last week. The only other recent work I've done on the engine was an oil & filter change (I used Mobile-1 5W/30)...

On the upside, this doesn't appear to impact the drivability/performance of the vehicle, but I don't want to dismiss this and get bitten later...

Any ideas what I can try next? Or is this one of those things Jeeps do (I haven't had it for very long - only 3 weeks)?

Thanks,

JW