let it warm up proper (hit closed loop) and check it agian. if you have a dead or clogged injector your car will run lean. so in order for the O2 sensor to read the right thing you have to drive the engine a bit rich. so your long term and short term should read higher, but since you weren't in closed loop those readings could be inacurate. same situation for a lean-mis.

if your OBD-2 tool has bi-directional controls you should be able to cancel the operation of one injector out of the lot. if not, you can manually remove the plug from each injector( it wont hurt it, but don't short it.. that will)

i know my 91 runs 38PSI regulated. and 42PSI topped.