replacing the rear hatch mechanism in a 96

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: replacing the rear hatch mechanism in a 96 #414856 03/12/04 04:12 PM

Joined: Feb 2000

Posts: 85

Norwalk, Ohio

ed_herman

Getting the Wheeling Fever

3-12-04 I have had what sounds like a similar problem on my 98. I opened the inside of the hatch(remove pullhandle and the cover) and sprayed everything I could see that was related to the handle/release and it helps for awhile. Good luck. Ed

Entire Thread
Subject	Posted By	Posted
replacing the rear hatch mechanism in a 96	Anonymous	03/09/04 09:01 PM
Re: replacing the rear hatch mechanism in a 96	ed_herman	03/12/04 04:12 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.532s Queries: 15 (3.529s) Memory: 0.5924 MB (Peak: 0.6254 MB) Data Comp: Off Server Time: 2026-06-14 18:47:20 UTC
Valid HTML 5 and Valid CSS