Fishplating the Trailing Arms...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Fishplating the Trailing Arms... [Re: AcidophilusRex] #417022 03/13/04 08:11 AM

Joined: Sep 2001

Posts: 8,557

Ocean Springs, MS

LandRaider Offline

Forum Moderator

Nah. As long as they don't ground it on the posisitive side of the system!!! haha As long as they put the ground on the frame, it will be fine. I personally woudl remove them to make sure I got the best welds possible there. Get emmmHOT!! Megablast weld

87 Raider 4D56td v5MT1
31's..Basically Stock

Entire Thread
Subject	Posted By	Posted
Fishplating the Trailing Arms...	AcidophilusRex	03/13/04 07:59 AM
Re: Fishplating the Trailing Arms...	LandRaider	03/13/04 08:11 AM
Re: Fishplating the Trailing Arms...	OKRED	03/13/04 01:09 PM
Re: Fishplating the Trailing Arms...	DougH	03/13/04 03:31 PM
Re: Fishplating the Trailing Arms...	Anonymous	03/14/04 06:11 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.349s Queries: 16 (4.347s) Memory: 0.6016 MB (Peak: 0.6345 MB) Data Comp: Off Server Time: 2026-11-04 16:45:02 UTC
Valid HTML 5 and Valid CSS