ok,
I've replaced the lowers before, a PITA. Now its time for the uppers. I took it apart enough today to get a good look at what I'm in for. It looks like I'm not going to have room to get my pitman arm puller in there to pop this off. I had to remove the caliper to get that out of the way to have any room at all. It even looks REAL hard to get a socket on the large nut to remove that.
I decided to stop tearing into the job after noticing the above things. I figured I'd ask you guys for some pointers on getting these <img src="/forums/images/graemlins/evil.gif" alt="" /> things off.
Wow, a write up with pictures sure would be nice about now....
Thanks for ANY help!
Jason