Replacing upper ball joint

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Replacing upper ball joint [Re: Jason_dup1] #417500 03/15/04 03:18 AM

Joined: Dec 2000

Posts: 760

Winnipeg, Manitoba, Canada

oldsub86

Rock Warrior

Undo the brake line and move it out of the way if you have to. Looks like lots of room for a socket if you move it. Don't know about the pitman arm puller. You may be better off getting a pickle fork so you don't need so much room.

1995 V6 SR5 5 speed 4X4 - 4Runner - dark blue

Entire Thread
Subject	Posted By	Posted
Replacing upper ball joint	Jason_dup1	03/14/04 06:22 AM
Re: Replacing upper ball joint	Frankenyota	03/14/04 07:30 AM
Re: Replacing upper ball joint	Buster	03/14/04 05:07 PM
Re: Replacing upper ball joint	Jason_dup1	03/15/04 12:58 AM
Re: Replacing upper ball joint	Jason_dup1	03/15/04 03:05 AM
Re: Replacing upper ball joint	oldsub86	03/15/04 03:18 AM
Re: Replacing upper ball joint	Buster	03/15/04 07:40 AM
Re: Replacing upper ball joint	Jason_dup1	03/15/04 03:46 PM
Re: Replacing upper ball joint	Kaptain	03/15/04 04:58 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.447s Queries: 16 (3.444s) Memory: 0.6093 MB (Peak: 0.6423 MB) Data Comp: Off Server Time: 2026-06-18 16:10:39 UTC
Valid HTML 5 and Valid CSS