Sea Foam (best methods for 3.2 valve tick)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Sea Foam (best methods for 3.2 valve tick) [Re: snowrodeo] #418820 03/21/04 07:17 PM

Anonymous

Unregistered

I like sea foam and have used it a few times, pretty sure my fuel injection is cleaner. My question is how does bg44k and other bg products compare ?

Entire Thread
Subject	Posted By	Posted
Sea Foam (best methods for 3.2 valve tick)	Gary O	03/16/04 08:01 PM
Re: Sea Foam (best methods for 3.2 valve tick)	Wayne	03/16/04 08:40 PM
Re: Sea Foam (best methods for 3.2 valve tick)	mike_dup1	03/16/04 10:28 PM
Re: Sea Foam (best methods for 3.2 valve tick)	TomJones	03/17/04 02:52 AM
Re: Sea Foam (best methods for 3.2 valve tick)	TrooperMark	03/17/04 11:22 PM
Re: Sea Foam (best methods for 3.2 valve tick)	snowrodeo	03/20/04 11:17 PM
Re: Sea Foam (best methods for 3.2 valve tick)	Anonymous	03/21/04 07:17 PM
Re: Sea Foam (best methods for 3.2 valve tick)	Gary O	03/22/04 06:17 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.473s Queries: 16 (3.471s) Memory: 0.6044 MB (Peak: 0.6374 MB) Data Comp: Off Server Time: 2026-06-13 14:19:32 UTC
Valid HTML 5 and Valid CSS