Transfer case removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Transfer case removal [Re: flyfishingjeep] #420873 03/20/04 04:17 AM

Anonymous

Unregistered

its pretty straight forward just pull the driveshaft pull all the connectors and stuff going to it drain it remove the bolts holding to the tranny then pull it backa and off. just be carful it is fairly havey a good floor jack will be very useful.

Entire Thread
Subject	Posted By	Posted
Transfer case removal	flyfishingjeep	03/20/04 03:33 AM
Re: Transfer case removal	Anonymous	03/20/04 03:40 AM
Re: Transfer case removal	flyfishingjeep	03/20/04 03:53 AM
Re: Transfer case removal	Anonymous	03/20/04 04:17 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.513s Queries: 16 (3.511s) Memory: 0.5958 MB (Peak: 0.6287 MB) Data Comp: Off Server Time: 2026-06-19 23:10:13 UTC
Valid HTML 5 and Valid CSS