'97 3.2 Rodeo (Passport) Starter

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: '97 3.2 Rodeo (Passport) Starter [Re: Gary O] #422126 03/23/04 02:12 AM

Joined: Sep 2003

Posts: 826

Poconos, PA

hunterdan

Rock Warrior

yup, that hose is just a vent. Some have them some dont. Seems to be on mainly the gear reduction starters.

Dan

92 Rodeo, 3.1 TB crank, custom bumpstop spacers, DOR shackles, Flipped ball joints, D44 Rear, 4.56s and new magnaflow cat and dynomax ultraflow muffler Since been replaced by a 2 door Explorer on 31's shackles, cranked torsion bars and full exhaust

Entire Thread
Subject	Posted By	Posted
'97 3.2 Rodeo (Passport) Starter	Gary O	03/22/04 06:24 PM
Re: '97 3.2 Rodeo (Passport) Starter	Gary O	03/22/04 07:26 PM
Re: '97 3.2 Rodeo (Passport) Starter	hunterdan	03/23/04 02:12 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.811s Queries: 16 (3.809s) Memory: 0.5948 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-06-18 21:51:31 UTC
Valid HTML 5 and Valid CSS