I went to an auto parts store (O'Reillys) and bought the whole set up and a piece of brake line for about $110 for an eary '80's CJ with the 4 cylinder motor.
Cut a hole in my firewall, drilled mounting hole's, drilled a hole thru the clutch pedal and mounted the rod, (rod already has a big hole in it for this), with a bolt, washers and a cotter pin.
Had to do a lot of measuring to put the clutch master cylinder in the right place so the rod came thru the firewall and set right up next to where I wanted to mount it to the pedal arm.
I love it, before with the solid linkage, when I had the frame all twisted up, the clutch wouldn't work, the pedal would be almost to the floor, now I have no problem at all.
Only problem I really had was I did not have the rod that goes to the clutch fork, so I just improvised with the one on the manual setup.
It's not a hard upgrade at all, and it's well worth it.