Chris, without a doubt the best place locally is Rocky Mountain Driveline. He can open up your CV or use it as a core for a good reconditioned Toy CV. One thing to be certain to do, the guy there has a liking for domestic yokes and ujoints. Specify and demand Toyota and he will do it for you.

I talked with Mike and let him know you were frustrated trying to contact him. The phone is becoming a bottleneck for him, but that is not an excuse, but he said he never got a message. You can drop off your driveshafts and Mike can turn them around in a day, using RM Driveline, for the same cost. The advantage is, he is closer to you and RM Driveline knows if they use anything but Toyota Mike will refuse it. They have a good working relationship which can work to your advantage.

As far as redoing the shafts, yes, its maddening. One option if a dual case is soon, is to do a temporary square tube shaft yourself, and open up the CV joint yourself. Just don't drive highway speeds in 4x4 till you get the dual cases and the nice shafts. Make it long enough, and you will have an emergency spare. Erik B. did a good article on the CV mods, in the Toyota tech section here.

Last edited by Bill_Morgan; 03/26/04 05:46 PM.

-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell