Thanks for the info Bill. I was just checking over on Colorado4x4.org for a shop recommendation, but going through a "toyota only" shop is probably a good idea. Does Roger's number sound right for how much I should expect to pay through Mike? Would I still need to take measurements or can they do that down at ORS? I haven't been down to their new shop. Is it easy to find? I got a card in the mail and it looks like it is just off the railroad tracks east of Wadsworth. I think I have been back there to the Fedex depot.

I don't mean to whine about the cost, but when you first get into this crossover thing you look at around $400 for the kit and then the steering box. I didn't want my first welding project to be beefing up the frame to mount the box, so I had to add that plus install. I needed to move the axle forward to fit the 35's. Longer shocks needed the shock mounts moved plus longer brake lines. I still haven't gotten into the u-bolt flip or new bumpstops. With another $300 for driveline mods I am getting close to $1500 to get my crossover steering purchased, installed and fully functional. I just figured for anyone else looking to do this they should be aware that it affects so many things.

Chris Sutton
Golden, Colorado


1985 Toyota 4Runner - Longfields, 5.29's, EZ Locker F/R, Marlin X-Over, Rancho 99012's, 35" BFG AT KO, 414K miles.
1996 FZJ80 stock with 191K miles.
1980 FJ40 stock with 85K original miles.