Ok Bare with me, I could really use the teaching here!

On your website TPS Adjustment for 85-88 year 4cyl.
Test 1 VTA-E2 says 200-800 Ohms My Meter setting should be set to 20K (1*.*** Reading)
When I measure Test 1 My reading (if good) should be 00.500?

Test 2 IDL-E2 says <2.3K My reading (if on 20K) should be Less than 02.300?

Test 3 IDL-E2 says Open My reading will be (1*.***).

Test 4 VTA - E2 says 3.3K-10K My reading should be in the middle.

I think the last time I did this I tried to get TEST 1 to 500 ohms like you recommended.

I will have to go back out there tommorrow and attack it.

Thanks 4Crawler for your patience! If my reply is wrong in any of the readins please correct me!