No sequence is specified.

Here's the '01 FSM text:
Install intake air connector assy (the lower part)
Install with a new gasket, 3 bolts, and two nuts
Torque: 18Nm, 13 ft.lbf
Install the DLC1 to the bracket (the diagnostic connector ? )
Install the ground strap to the intake air connector with the bolt.
Connect the fuel return hose.
Connect the vacuum sensing hose to the fuel pressure regulator.
Install the engine wire with the bolt.
Install air intake chamber assy (the top part)
Install with a new gasket, 4 bolts, and 2 nuts
Torque: 18Nm, 13 ft.lbf

I hope that's what you needed....