Torque specs needed!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Torque specs needed! #429431 04/05/04 12:04 AM

Joined: Feb 2004

Posts: 39

Dark_Angel Offline

Getting the Wheeling Fever

I think I bent a valve, by geeting water into the engine. Not fun, I am in the process of tearing down. Doe anyone have the torque specs for the heads, cam bolt and intake? And any other help would be great. Thanks,

2000 Trooper 4x4, Auto, TOD pretty much stock at the moment.

2001 Camaro Z28, M6, fully loaded and too many mods to list! AKA Dark Angel

Entire Thread
Subject	Posted By	Posted
Torque specs needed!	Dark_Angel	04/05/04 12:04 AM
Re: Torque specs needed!	Bigpoppax2	04/05/04 02:49 AM
Re: Torque specs needed!	Dark_Angel	04/06/04 02:07 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.575s Queries: 15 (3.573s) Memory: 0.5963 MB (Peak: 0.6293 MB) Data Comp: Off Server Time: 2026-06-18 17:23:01 UTC
Valid HTML 5 and Valid CSS