Tubing benders

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Tubing benders [Re: superdawg] #429963 04/07/04 09:30 PM

Joined: Oct 2002

Posts: 4,482

Phoenix, Arizona

azrain

Emeritus Staffer and Moderator

Quote

The one shot, homebuilt and Williams are all limited to dies that can only bend up to 90 degrees.

Interesting point. Come to think about it, I've never bent any tube beyond 60 deg. next door.

Looks like the consensus is the JD2?

Mike

Entire Thread
Subject	Posted By	Posted
Tubing benders	Bansil	04/05/04 10:18 PM
Re: Tubing benders	matts	04/06/04 12:51 AM
Re: Tubing benders	azrain	04/06/04 01:06 AM
Re: Tubing benders	bkg	04/06/04 03:00 PM
Re: Tubing benders	ZUK	04/06/04 07:57 PM
Re: Tubing benders	superdawg	04/07/04 10:29 AM
Re: Tubing benders	azrain	04/07/04 09:30 PM
Re: Tubing benders	azrain	04/06/04 04:55 AM
Re: Tubing benders	Bansil	04/06/04 10:18 AM
Re: Tubing benders	Bansil	04/08/04 01:29 AM
Re: Tubing benders	Anonymous	04/08/04 03:37 AM
Re: Tubing benders	Anonymous	04/09/04 08:14 AM
Re: Tubing benders	StinkBug	04/12/04 09:18 PM
Re: Tubing benders	Bansil	04/15/04 10:34 AM
Re: Tubing benders	kmac	04/17/04 02:05 AM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.503s Queries: 16 (3.501s) Memory: 0.6224 MB (Peak: 0.6554 MB) Data Comp: Off Server Time: 2026-06-18 20:41:59 UTC
Valid HTML 5 and Valid CSS