Blower in.. Cable problem solved (no photos) yet.
I used a longer cable, one that came with the blower setup for Holly carbs. I don't think it will last much longer as it's starting to fray. I will try replacing the inside cable itself with some bike cable first, then I'll move on to the 85+ cable - thanks for the suggestion!

Problems:
Blow-by... Turns out my copper head gasket ($65) sucked. Torquing the head to spec, it still puked water and created a mess. I finally tore it down, put in a felpro, and it's running much better.

Currently, I've got the blower setup for 4-5 psi, at least that's what I was told in terms of the pulley being on it. It's producing 4-5 psi way up, like at 4900 rpm, so I don't like that. I need to find if that is where the peak boost will be produced. I'd like to see 4-5 psi at 2900 rpm.

I wish someone else had one of these blowers!

-Darin