LC Engineering service.. or lack thereof (long post)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: LC Engineering service.. or lack thereof (long post) [Re: Runner-Man] #432583 04/10/04 03:10 AM

Joined: Jul 2002

Posts: 1,399

Flagstaff, AZ

ArbitraryNotion Offline

Body Damage is Cool

They've given me the runaround a few times. Too bad their stuff is so good... Otherwise I wouldn't get anything from them.

About the 4x2 header...

The differance is going to be in the length of the pipes. Think about it, the engine sits lower to the ground and higher in the bay. It shouldn't make much difference but you may need some custom pipeing because of the angles. Thats the only difference I can imagine.

Josh

1986 Toyota 4x4 22wEBer
Ported EB Offroad H/O Head "Josh Cam"
Ported Intake & Weber38mm Carb
LCE Header & 2.25in Exhaust
RB 1" BL, RS5000, SAW Tbars

2011 FJ Cruiser - SOLD

Entire Thread
Subject	Posted By	Posted
LC Engineering service.. or lack thereof (long post)	Runner-Man	04/10/04 02:12 AM
Re: LC Engineering service.. or lack thereof (long post)	ArbitraryNotion	04/10/04 03:10 AM
Re: LC Engineering service.. or lack thereof (long post)	kuso	04/10/04 03:16 AM
Post deleted by little_joe	Anonymous	04/10/04 03:57 AM
Re: LC Engineering service.. or lack thereof (long post)	Anonymous	04/10/04 04:39 AM
Re: LC Engineering service.. or lack thereof (long post)	Jeepeater	04/10/04 06:27 AM
Re: LC Engineering service.. or lack thereof (long post)	James Chow	04/10/04 06:34 AM
Re: LC Engineering service.. or lack thereof (long post)	ArbitraryNotion	04/10/04 04:35 PM
Post deleted by little_joe	Anonymous	04/10/04 04:46 PM
Re: LC Engineering service.. or lack thereof (long post)	Ganoid	04/10/04 06:00 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: