E-Locker swap, still have ABS?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: E-Locker swap, still have ABS? [Re: spannky] #432834 04/11/04 06:24 AM

Joined: Jan 2001

Posts: 11,595

Cincinnati, OH

Adam F

Forum Moderator

If you swap entire axles from a Tacoma or 4Runner there is an ABS sensor on these axles, which is a ring on the end of the axle shaft, and there is a wiring harness that you can plug into. Now, weather or not this will work with the 2nd gen ABS system, I dont know.

88 4R, 350 V8, R150 5 speed Sold <...uot; />
97 4R, stock, daily driver
98 Sienna, kid and dog hauler, wife's ride

Entire Thread
Subject	Posted By	Posted
E-Locker swap, still have ABS?	914Runner	04/10/04 08:45 PM
Re: E-Locker swap, still have ABS?	Staceman	04/10/04 11:31 PM
Re: E-Locker swap, still have ABS?	spannky	04/11/04 05:04 AM
Re: E-Locker swap, still have ABS?	914Runner	04/11/04 06:22 AM
Re: E-Locker swap, still have ABS?	Adam F	04/11/04 06:24 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.768s Queries: 16 (3.764s) Memory: 0.6012 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-10-28 06:57:42 UTC
Valid HTML 5 and Valid CSS