Welders

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Welders [Re: Ganoid] #433305 04/13/04 02:33 PM

Joined: Oct 1999

Posts: 2,211

Denver, Colorado

superdawg

Body Damage is Cool

Miller 210, just got rid of the Hobart, it sucked.

I'll be getting the spool gun for the my 210 so I can do Aluminum and Dual shield.

Stay away from welding rigs that don't have a wide range of adjustability, you may think (now) that you will only be doing small projects, just start welding you'll see.

SD

Entire Thread
Subject	Posted By	Posted
Welders	Ganoid	04/11/04 09:08 PM
Re: Welders	Bigpoppax2	04/11/04 09:37 PM
Re: Welders	Anonymous	04/12/04 10:23 PM
Re: Welders	Ishikawa	04/12/04 11:13 PM
Re: Welders	Ganoid	04/13/04 05:45 AM
Re: Welders	superdawg	04/13/04 02:33 PM
Re: Welders	jeepfiend	04/13/04 10:00 PM
Re: Welders	Anonymous	04/14/04 09:21 AM
Re: Welders	Snowtoy	04/15/04 08:49 AM
Re: Welders	chasespeed	04/16/04 12:59 AM
Re: Welders	Anonymous	04/14/04 10:29 PM
Re: Welders	Anonymous	04/15/04 06:53 AM
Re: Welders	Anonymous	04/20/04 03:47 AM
Re: Welders	Anonymous	04/20/04 09:52 PM
Re: Welders	Dandeman	04/21/04 12:18 AM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.472s Queries: 16 (3.469s) Memory: 0.6218 MB (Peak: 0.6548 MB) Data Comp: Off Server Time: 2026-06-11 00:49:29 UTC
Valid HTML 5 and Valid CSS