Welders

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Welders [Re: Ganoid] #433309 04/15/04 06:53 AM

Anonymous

Unregistered

I actually have a Clarke, and it has worked very well for me. I haven't spent much time on the others in your list though, so there's no basis for comparison.

If you're just looking for a welder to use for the occasional project, you should be very pleased with the Clarke.

Entire Thread
Subject	Posted By	Posted
Welders	Ganoid	04/11/04 09:08 PM
Re: Welders	Bigpoppax2	04/11/04 09:37 PM
Re: Welders	Anonymous	04/12/04 10:23 PM
Re: Welders	Ishikawa	04/12/04 11:13 PM
Re: Welders	Ganoid	04/13/04 05:45 AM
Re: Welders	superdawg	04/13/04 02:33 PM
Re: Welders	jeepfiend	04/13/04 10:00 PM
Re: Welders	Anonymous	04/14/04 09:21 AM
Re: Welders	Snowtoy	04/15/04 08:49 AM
Re: Welders	chasespeed	04/16/04 12:59 AM
Re: Welders	Anonymous	04/14/04 10:29 PM
Re: Welders	Anonymous	04/15/04 06:53 AM
Re: Welders	Anonymous	04/20/04 03:47 AM
Re: Welders	Anonymous	04/20/04 09:52 PM
Re: Welders	Dandeman	04/21/04 12:18 AM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.513s Queries: 16 (3.511s) Memory: 0.6193 MB (Peak: 0.6523 MB) Data Comp: Off Server Time: 2026-06-16 04:01:49 UTC
Valid HTML 5 and Valid CSS