Safelite came today to repair my glass. The tech took a look at the molding around the edge of the glass and says he can't do it. Their glass doesn't come with the molding and he wouldn't install it without; it couldn't be reused due to the glue, shards, etc. A call to their offices revealed that it would have to be ordered from Isuzu, would take about a week to recieve, and would cost an additional $50. I agree that the molding is an essential part of the installation as this would buffer some of the shock through useage endured otherwise. Also, both of us are unsure/confused as to why there are no notes about it in the ordering process; this was also to be the case with my local glass dealer after consulting with them. I sent him on his way only to continue with my parts research. None of my local Isuzu dealers had the necessary parts, 3 in all, an upper and two sides. I finally put a call into St. Charles and am having them overnight the parts for a grand total of $50. So Safelite is coming out the morning after tomorow to install it.
What I am trying to explain in so many words is that if you have this problem:
1. Call Safelite, order the glass and setup installation for 2 business days later.
2. Call St. Charles, order the molding that goes aound the glass and have it overnighted.
3. Cross your fingers that there are no delays.
Also, having a price to match/beat is a good idea, mine was $250 from Triumph Autoglass, which Safelite was OK to match. Hope this helps someone.
-Eric


www.burnlounge.com/mp3me
'00 Rodeo LS 4x4; "K&N" cone filter; S/S Manik Front, Rear, & Nerf; 'Modest' sound system; 1.5" R'ooper lift, 265/70/16 Dunlop RVxt, Skyjacker Hydros, OEM LSD (sans G80 code)