2.8 baretta engine

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.8 baretta engine [Re: Jim_Paget] #434402 04/13/04 04:29 PM

Joined: Oct 2003

Posts: 1,318

Monson, MA

chasespeed Offline

Body Damage is Cool

Yes the Beretta was FWD...if you wanted, you could find one of those Luminas with the 3.4 DOHC, which is also the same Bolt pattern and bellhousing..but MUVH more powerfull than the 2.8, in fact, I think it is up there with our 3.5 maybe a little off though

Chase

Chase

Entire Thread
Subject	Posted By	Posted
2.8 baretta engine	RSimister	04/13/04 03:22 PM
Re: 2.8 baretta engine	RobG	04/13/04 03:48 PM
Re: 2.8 baretta engine	mlclark	04/13/04 03:54 PM
Re: 2.8 baretta engine	Jim_Paget	04/13/04 04:24 PM
Re: 2.8 baretta engine	chasespeed	04/13/04 04:29 PM
Re: 2.8 baretta engine	Ed Mc	04/13/04 08:08 PM
Re: 2.8 baretta engine	94redrodeo	04/14/04 02:25 AM
Re: 2.8 baretta engine	chasespeed	04/14/04 04:13 AM
Re: 2.8 baretta engine	Ed Mc	04/14/04 05:30 AM
Re: 2.8 baretta engine	TROOPOWER	04/15/04 07:11 AM
Re: 2.8 baretta engine	RSimister	04/15/04 03:17 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.522s Queries: 16 (3.519s) Memory: 0.6145 MB (Peak: 0.6475 MB) Data Comp: Off Server Time: 2026-06-23 19:05:37 UTC
Valid HTML 5 and Valid CSS