Intake manifold gasket replacement by a gimp

Print Thread

Rate Thread

Re: Intake manifold gasket replacement by a gimp [Re: rattler98] #435188 04/16/04 11:02 AM

Joined: Apr 2004

Posts: 457

Fort Worth, Texas!!

icu_runnin Offline

Mudrunner

yeah no highjacking but A LOT of my ?'s have been answered in this thread. thanks guys. i too was have that same leak. i thought it was coming from there but couldnt see how from under. i replaced the dist. o ring twice thinking the first was bad. i will wait to replace my gasket until i get my 4.3 tb. From the looks of it is the holley upgrade larger than the stock 4.3? and are the roller rockers a drop in install?

Entire Thread
Subject	Posted By	Posted
Intake manifold gasket replacement by a gimp	Anonymous	04/14/04 08:16 PM
Re: Intake manifold gasket replacement by a gimp	Tom_G	04/14/04 08:24 PM
Re: Intake manifold gasket replacement by a gimp	rattler98	04/14/04 08:55 PM
Re: Intake manifold gasket replacement by a gimp	paulevans76	04/14/04 10:10 PM
Re: Intake manifold gasket replacement by a gimp	Anonymous	04/15/04 02:29 AM
Re: Intake manifold gasket replacement by a gimp	CPOM	04/15/04 02:48 AM
Re: Intake manifold gasket replacement by a gimp	JohninLV	04/15/04 06:34 PM
Re: Intake manifold gasket replacement by a gimp	hunterdan	04/15/04 10:51 PM
Re: Intake manifold gasket replacement by a gimp	94redrodeo	04/16/04 03:16 AM
Re: Intake manifold gasket replacement by a gimp	rattler98	04/16/04 04:30 AM
Re: Intake manifold gasket replacement by a gimp	icu_runnin	04/16/04 11:02 AM
Re: Intake manifold gasket replacement by a gimp	chasespeed	04/16/04 02:15 PM
Re: Intake manifold gasket replacement by a gimp	chasespeed	04/16/04 02:18 PM
Re: Intake manifold gasket replacement by a gimp	JohninLV	04/16/04 06:50 PM
Re: Intake manifold gasket replacement by a gimp	Anonymous	04/17/04 05:15 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: