Welding class - is it worth it?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Welding class - is it worth it? [Re: Nick26] #435751 05/13/04 05:40 PM

Anonymous

Unregistered

Here are the specs on the Lincoln:
http://content.lincolnelectric.com/pdfs/products/literature/e240.pdf

Not sure when I am going to buy the TIG, though, so I am not sure when I'd be selling the stick welder. My sister lives in Jersey, just east of Philly, so I get over that way every now and then.

Wire feed - 24 ga. to 1/4"
Stick - 16 ga. to plate

Light work and sheetmetal I pick up the wirefeed. If I am working with heavier stuff it is a lot faster to use the stick than wait for the wire feed to build up a big enough bead.

Entire Thread
Subject	Posted By	Posted
Welding class - is it worth it?	HCMP	04/15/04 07:37 PM
Re: Welding class - is it worth it?	Anonymous	04/15/04 08:29 PM
Re: Welding class - is it worth it?	HCMP	04/15/04 09:21 PM
Re: Welding class - is it worth it?	off-roader	04/16/04 12:25 AM
Re: Welding class - is it worth it?	superdawg	04/16/04 05:30 AM
Re: Welding class - is it worth it?	Anonymous	04/16/04 01:18 PM
Re: Welding class - is it worth it?	HCMP	04/16/04 06:07 PM
Re: Welding class - is it worth it?	Elbow_Greese	04/16/04 07:48 PM
Re: Welding class - is it worth it?	Anonymous	04/17/04 07:25 AM
Re: Welding class - is it worth it?	Nick26	05/07/04 03:28 PM
Re: Welding class - is it worth it?	HCMP	05/10/04 06:36 PM
Re: Welding class - is it worth it?	Nick26	05/10/04 06:45 PM
Re: Welding class - is it worth it?	Anonymous	05/10/04 10:08 PM
Re: Welding class - is it worth it?	Nick26	05/11/04 03:09 PM
Re: Welding class - is it worth it?	Anonymous	05/11/04 05:52 PM
Re: Welding class - is it worth it?	HCMP	05/12/04 02:26 PM
Re: Welding class - is it worth it?	Anonymous	05/13/04 02:54 PM
Re: Welding class - is it worth it?	Nick26	05/13/04 03:03 PM
Re: Welding class - is it worth it?	Anonymous	05/13/04 05:40 PM
Re: Welding class - is it worth it?	off-roader	05/13/04 06:01 PM
Re: Welding class - is it worth it?	Anonymous	05/14/04 08:51 AM
Re: Welding class - is it worth it?	off-roader	05/14/04 06:27 PM
Re: Welding class - is it worth it?	kyle-22r	05/15/04 11:52 PM
Re: Welding class - is it worth it?	4xJedi	05/09/04 02:42 PM
Re: Welding class - is it worth it?	Kona	05/10/04 04:36 PM
Re: Welding class - is it worth it?	kewlynx	05/19/04 08:34 AM
Re: Welding class - is it worth it?	Anonymous	05/19/04 07:28 PM
Re: Welding class - is it worth it?	Nick26	05/19/04 07:50 PM
Re: Welding class - is it worth it?	Anonymous	05/20/04 07:51 AM
Re: Welding class - is it worth it?	hayhauler	05/20/04 01:44 PM
Re: Welding class - is it worth it?	Anonymous	05/20/04 05:37 PM
Re: Welding class - is it worth it?	superdawg	05/21/04 08:12 AM
Re: Welding class - is it worth it?	Anonymous	05/21/04 10:04 PM
Re: Welding class - is it worth it?	jasonmt	05/23/04 07:59 PM
Re: Welding class - is it worth it?	Anonymous	05/24/04 06:01 PM
Re: Welding class - is it worth it?	jasonmt	05/24/04 08:11 PM
Re: Welding class - is it worth it?	Anonymous	05/25/04 05:37 PM
Re: Welding class - is it worth it?	Anonymous	05/25/04 09:51 PM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.489s Queries: 16 (3.487s) Memory: 0.6764 MB (Peak: 0.7157 MB) Data Comp: Off Server Time: 2026-06-25 02:25:14 UTC
Valid HTML 5 and Valid CSS